News

4 Large Sheet Metal Shear Defects and How to Avoid Them
Below are some common shearing mistakes that metal fabrication professionals tend to make during machining. This section also provides insights on how to eliminate shear defects.

Feb 16,2023
The Ultimate Guide to Sheet Metal Shearing Device
Sheet metal shearing machine is widely used in the sheet metal processing industry. It can cut steel plate materials of various thicknesses. Read on to find out frequently asked questions about the shearing machine.

Feb 9,2023
5 Interesting Use Cases for Mechanical Shears
There are different types of shears that perform the same task in different ways. So what can the shears be used for? Here are a few examples of the use of the shearing machine.

Jan 31,2023
How Metal Shearing Works and Its Common Pitfalls?
Metal shear defects are common for various reasons. Such flaws can affect the quality of work and lead to dissatisfied clients. That's why it's important to analyze the flaws and work on the solutions.

Jan 13,2023
What is the Difference Between Transverse Shear Line and Vertical Shear Line?
The transverse cutting line and longitudinal cutting line are easy to operate, which can reduce the time for finishing silicon steel sheets. So, do you know the difference? Read on to learn more.

Jan 6,2023
What is a Silicon Steel Slitting Line?
A silicon steel slitting line is a metal processing line that cuts wide steel coils into narrower or shorter strips. The following is a detailed introduction to what is silicon steel slitting line.

Dec 22,2022
What Should Be Paid Attention to when Operating the Slitting Machine?
The correct operation and use of the slitting machine can reduce the abnormal wear and tear of the equipment; so what should be paid attention to in the operation of the slitting machine?

Dec 15,2022
The Composition of the Shearing Process of the Silicon Steel Sheet Slitting Line
The slitting line is suitable for steel coils of various specifications. There are many advantages. The following is an introduction to the composition of its cutting process.

Dec 8,2022
What is Coil Slitting and Steel Slitting Line Process Introduction?
Slitting line is a metal manufacturing process with a wide range of applications. The following briefly introduces the steel slitting line process and other issues.

Dec 1,2022
How Long Does the Shearing Blade Last? How to Improve the Service Life of Shearing Machine Blades?
How to improve the service life of shearing machine blades? Let's talk about the service life of the shearing machine blade in detail and how to improve the service life of the shearing machine blade.

Nov 23,2022
The Complete Guide to Maintaining Your Shearing Machine!
Proper operation of shears requires careful planning and the implementation of a preventive maintenance program. Here are some great tips to keep your shears in good working order.

Nov 17,2022
What Are the Common Problems with Shearing Blades? How to Solve?
What are the common problems encountered with shearing blades? What are the fixes for common problems with shearing blades? The following is the failure analysis of common shearing machine blades:

Nov 9,2022
What is the Difference Between a Mechanical Shearing Machine and a General Shearing Machine?
Once the mechanical shearing machine is improperly selected, the production cost will rise. Therefore, there are several factors that must be paid attention to when making a decision.

Nov 2,2022
Correct Operation Process After the Slitting Line is Powered on
The slitting line is special equipment for rolling metal sheet leveling. The following is a brief introduction to the correct operation process of the slitting line after it is powered on.

Oct 26,2022
What Are the Application and Advantages of Slitting Line?
The application scale of the slitting line is also very wide, and it has applications in various fields. Now let's take a look at the advantages of slitting lines.

Oct 22,2022
Mechanical VS Hydraulic, What is the Best Choice for Shearing Metal
While the mechanical vs hydraulic shears debate is still very hot, we can go through the following introduction to metal shearing and the pros and cons of both types of shears. Help you buy the right equipment.

Oct 11,2022
Beginners Buying Guide for Shear Machines
Sheet metal shears have different cutting mechanisms and are essential in industries that work with metals and sheets. The purpose of this guide is to highlight important aspects of shears.

Sep 30,2022
5 Safety Tips to Follow When Using Sheet Metal Cutting Tools
Sheet metal shears are one of the must-have industrial tools used today. But they pose a potential danger to workers if not handled properly. Read on for safety tips to follow when using sheet metal cutting tools.

Sep 22,2022
Small Knowledge of Operation and Maintenance of Slitting Machine
The metal slitting machine is mainly used for slitting metal coils. This is also the mainstream product in the current metal shearing equipment. The following is an introduction to the operation and maintenance of the slitting machine.

Sep 13,2022
What Are the Types of Metal Slitter Belts?
The slitting machine is widely used in tinplate, silicon steel sheet, cold-rolled strip steel, etc. It is to cut metal coils into strips of various widths. The following are the types of slitting machine belts.

Sep 7,2022
Analysis on the Future Development Direction of Metal Slitting Machine
While the metal slitting machine is widely used, higher requirements are also put forward in terms of technology and performance. Continue reading to understand the future development direction of the metal slitting machine.

Sep 2,2022
How to Improve the Quality of the Cross-cutting Line of Silicon Steel Sheet?
If the silicon steel sheet shearing device is improperly operated and fails to meet the quality control indicators, it will increase the no-load current and no-load loss. Therefore, the standardized operation is very important.

Aug 25,2022
Classification of Shearing Machine
Generally speaking, the shearing machine is divided into two categories: CNC hydraulic shearing machine and mechanical shearing machine. So how do choose a shearing machine reasonably? Below we have sorted out the classification of the shears to help you better understand the shears.

Aug 17,2022
Do You Know the Five Ways to Choose a Shearing Machine Correctly?
A shearing machine is a kind of forging machinery, and its main function is in the metal processing industry. Products are widely used in the light industry, automobile, electric power, and other industries. During the purchase, you should pay attention to the following points.

Aug 10,2022
Factors Affecting Shearing Quality of Metal Coils
We can measure the relative properties of silicon steel shreds from a number of different aspects. Among them, the shear quality of the metal coil is an important indicator. Today we will take you to understand the relevant factors that affect the shearing quality of metal coils.

Aug 2,2022
Hydraulic Shears Machine Guide
A hydraulic shearing machine is a machine that uses the movable upper blade and the fixed lower blade to break and separate the plates according to the required size. At present, it is widely used. The following introduces the working principle and advantages of hydraulic shears.

Jul 28,2022
How to Adjust the Tension of the Slitting Machine?
The tension of the slitting machine is an important factor to control the slitting effect of the product, so special attention is required. So what are the factors that affect the tension of the slitter and what are the control methods? Let's analyze it together.

Jul 20,2022
Slitter Machine Features and Precautions
Many factories now use slitter machines to cut metal and other materials. But do you really understand? The following article can help you gain a deeper understanding of the characteristics of the slitting machine.

Jul 13,2022
The Slitter Blade is Mainly Suitable for the Cutting of Various Metal Sheets
The slitting machine blade is mainly suitable for cutting various metal plates, such as carbon steel, stainless steel, alloy steel, etc. It is widely used and promoted in the metal product processing technology industry, and various enterprises have a high evaluation of the slitting machine.

Jul 6,2022
What are the advantages of silicon steel sheet cross-cutting line?
The silicon steel sheet cross-cutting line has the advantages of high speed, low noise, and long life. The following article will introduce you in detail.

Jun 30,2022

1
2
3
4
5
6

Hengli CNC TechnologyCo., Ltd was established in 2005, which is a national high-tech enterprisespecialized in researching and manufacturing of high-end industrial auto equipments,and is one of the main suppliers of Chinese metal plate cutting, formingautomation equipments. In April 2014, Hengli successfully listed in the new OTCmarket (stock code 430676) and became the first listed company in Huzhoucity.

Case Details